This firmware shared on androidtechpro.com helps you to re-install the Mobile Operating System on your Mobile Device. It also helps you to fix your Mobile device, if it is having any software error issue, IMEI error issue, Bootloop issue, a mobile dead issue.
Requirements: Your Realme Device bootloader should be unlocked before following the tutorial below. Realme Flash Tool will not work with Locked bootloader devices.
Download Realme NARZO 10 RMX2040 Flash File, Stock Rom. The given firmware file of Realme is the original official ROM file and it is in the OFP File extension, which describes how to flash and driver Install from MSM Download Tool. Here is how to flash Oppo Realme Phone with a flash file, which is given below in full detail. How to Flash Manual.
Sometimes we see some types of error in our phones like!
- Drain battery
- Not properly boot
- Not downloading anything
- Hand Logo fix Realme Narzo 10
[ Realme Narzo 10 SPECS AND EDL INFOMATION ]
Realme Narzo 10
Rom OS Version
Octa-core (2×2.0 GHz Cortex-A75 & 6×1.8 GHz Cortex-A55
Mediatek Helio G80 (12 nm)
NOTE – BACKUP YOUR ALL DATA INCLUDE PHOTOS VIDEOS MUSIC ALL ACCOUNTS
LIKE WHATSAPP FACEBOOK AND CALL LOGS AND CONTACT
Make sure data will be backup other wise all erased
It helps you to install or flash stock firmware on the Realme Devices. All you need to have the correct firmware of your Realme Device > Install the Google ADB Driver on the Computer > Launch the tool > Click on the Browse Button > Locate the .ofp firmware > Click on Flash to begin the flashing process.
Steps to Install MSM Download Tool
1 Download all needed files and extract them.
2 Install both the PDAnet.exe file and CodeMeterRuntime.exe file on your PC.
3 Open the CodeMeter Control Center and select the Licence file.
4 Now, Import License file and go to the Oppo_MSM_Download_Tool_None_Lic_2000 from the folder.
5 If you see the License Activated message in a window, that means you have activated the tool.
6 Now, you’re ready to begin flashing.
How to Flash Realme Narzo 10
Download Realme Narzo10 RMX2040 Flash File and Install Driver, Charge the phone 30% before flashing.
1 First, download the file from the link given above.
2 Extract files from the zip file and all files will be inside the folder.
3 Click On MSM Download Tool. After you open the tool, click on Start Bottom
4After that will verify your computer memory Checksum
5 Then switch off your phone to connect it to the phone tool.
6 Press the volume up and down simultaneously to connect the phone to the download mode and Plugin Cable
7 Your flashing will start and wait until it completes
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.
8 when the process complete then you remove the cable and start your phone and set up it
[highlight color=”red”]please do that your own risk[/highlight]
More Topics Here :