Download Realme C1 RMX1811 Flash File which is known as Stock ROM. The given firmware file of Realme is the original official ROM file and it is in the OFP File extension, which describes how to flash and driver Install from MSM Download Tool.
Requirements: Your Realme Device bootloader should be unlocked before following the tutorial below. Realme Flash Tool will not work with Locked bootloader devices
- 1 [ Why need Realme C1 flash file ]
- 1.1 Whats is full model Name of Realme rmx1811
- 1.2 Realme c1 cpu type
- 1.2.1 [ Realme C1 flash SPECS AND EDL INFOMATION ]
- 1.2.3 [tie_tooltip text=”please download mas tool becasue msm tool its paid free only crack ver” gravity=”n”]Before flashing you should install the MSM tool form the link below here[/tie_tooltip]
- 1.2.4 FIRMWARE FILE
[ Why need Realme C1 flash file ]
1. if your face boot loop like a problem
2. if you face software android is stoped
3. if face any software issue
4. memory full problem
Whats is full model Name of Realme rmx1811
Realme c1 model of the Realme rmx1811 so here full stock firmware this particular this model don’t download any another model of the flash file here is a full flash file for extract model
Realme c1 cpu type
Realme c1 comes with Qualcomm SDM450 Snapdragon 450 (14 nm) . mostly this cpu that time high end budget centric , why known cpu ? because its helps in flash firmware or idenfy model number and direct put in edl mode
[ Realme C1 flash SPECS AND EDL INFOMATION ]
Android 8.1 (Oreo)
Rom OS Version
Octa-core 1.8 GHz Cortex-A53
Qualcomm SDM450 Snapdragon 450 (14 nm)
It helps you to install or flash stock firmware on the Realme Devices. All you need to have the correct firmware of your Realme Device > Install the Google ADB Driver on the Computer > Launch the tool > Click on the Browse Button > Locate the .ofp firmware > Click on Flash to begin the flashing process.
NOTE – BACKUP YOUR ALL DATA INCLUDE PHOTOS VIDEOS MUSIC ALL ACCOUNTS
LIKE WHATSAPP FACEBOOK AND CALL LOGS AND CONTACT
How to Flash Realme C1 (RMX1811)
Download Realme C1 RMX1811 Flash File and Install Driver, Charge the phone 30% before flashing.
1 First, download the file from the link given above.
2 Extract files from the zip file and all files will be inside the folder.
3 Click On MSM Download Tool. After you open the tool, click on Start Bottom
4After that will verify your computer memory Checksum
5 Then switch off your phone to connect it to the phone tool.
6 Press the volume up and down simultaneously to connect the phone to the download mode and Plugin Cable
7 Your flashing will start and wait until it completes
Note: During flashing, do not remove the data cable from the phone, otherwise the phone can go into a dead mode.
8 when the process complete then you remove the cable and start your phone and set up it