Here you can download a flash file for HTC Desire 826 Android Phone. You can download and install the latest and original stock ROM (Firmware) for free. Also, flash tools available to flash your HTC mobile.
Contents
Why need htc desire 826 flash file
1. charging problem
2. Hang Logo
3. if face any software issue
4. Flash stock ROM or fastboot rom
5. Android has been stoped
6. heating problem solution
Important NOTE – BACKUP YOUR ALL DATA INCLUDE PHOTOS VIDEOS MUSIC ALL ACCOUNTS
LIKE WHATSAPP FACEBOOK AND CALL LOGS AND CONTACT Flashing stock firmware will permanently delete your device data. So backup all personal data to prevent data loss.
[ HTC Desire 826 Specifications ]
Display |
5.5 inches |
Resolution |
1080 x 1920 pixels |
Display Type |
Super LCD3 capacitive touchscreen |
Touchscreen |
Capacitive Touchscreen |
RAM |
2GB |
Internal Storage |
16gb |
Operating System |
Android 5.0.1 |
Processor |
Qualcomm MSM8939 Snapdragon 615 |
Rear Camera |
13 MP, f/2.2, AF |
Selfie Camera |
4 MP, f/2.0, 27mm (wide), 1/3″, 2µm (HK model) 13 MP (India model) |
Fingerprint Sensor |
NO |
Face Unlock |
NO |
Battery Capacity |
Li-Po 2600 mAh, non-removable |
Charger |
1amp Charge |
Cable |
USB Type Normal |
( Htc other model 616 bootloop )
Flashing with Recovery Mode
Note: You don’t need any flash tool or Computer or any other USB drivers to flash the firmware of HTC Desire 826 with this method. You need just a flash file.
[ HERE IS FULL PROCESS WITH PC ADB SETUP ]
- Download the all files
- Install the adb setup
- Open the folder adb from c drive ( Root folder )
- Copy htc deszire 616 -d616h in adb folder
- Rename update.zip
- hold sift key and right click mouse and comment window select
- Now open recovery menu in phone
- Hold vol + power botton 6sec and open recovery menu new select adb update
- And to pc and type commond ( adb sideload update.zip )
- Enter
[ FULL PROCESS WITHOUT PC ]
- Download the flash file
- Nextly, the Firmware file Move to SD card storage
- Power off your phone
- Then, Hold down the Volume Up + Power Button {or}Volume Down + Power Button
- After that, Select the BOOT TO RECOVERY MODE
- Next, While holding down the Power button press and release Volume Up Button.
- Navigate with Volume Buttons to select wipe data/factory reset option and press the Power Button.
- Then, Wipe the data/factory reset option then, use the Volume Buttons
- Select the YES option and press the confirm Power button
- Finally, select the reboot system.
You have successfully flash the Firmware or update without computer
https://youtu.be/JJIEB6HIhE0
