TECNO SPARK 3 AND FIRMWARE FLASH : in this blog, i nam goint to show how to flash techno spark
fix problem releated software and hang logo and frp fix soluiton

♦ WHY NEED TO FLASH TECHNO SPARK 3 ♦

» if you are face software-related issues

» if your phone in hang logo situation

» google id verification problem fix

» if your phone is soft brick

» Rooted phone to unroot

Tecno Spark K3 Firmware Information And Specs 

 |How to Flash Tecno SPARK 3 |

» PRE REQUIREMENTS

1. Tecno spark 3 phone

2. Data cable

3. Sp flash tool

4. firmware file

5. MTK DRIVERS

» Follow all the below steps very carefully

1. First of all, Download all the file
2. Once all the files downloaded extract the Tecno Spark 3 flash file ( WinRAR or 7 zip )
3. Install drivers
4. after open sp flash tool
5. select option file
6. And open firmware folder and select sector file
7. and select download mode
8. Connect phone hold vol up ( First, Power Off your Device )
9. now detect your phone in pc
10. firmware flashing start

Make Sure:– Before you connect your device you need to install MTK USB driver on your PC.

Once flashing finished, then you will get a pop-up window.
Then disconnect and power on your device.
Great, you have successfully done Tecno Spark 3

Tecno Spark 3 FRP Bypass

Full Guide for Tecno Spark 3 FRP Bypass

1. FIRS FLASH FRIMWARE
2. AFTER DOWNLOAD DA FILE FOR TECNO SPARK 3
3. OPEN SP FLASH TOOL
4. SELECT DA FILE ( click download )
5. ( First, Power Off your Device )
6. Connect phone hold vol up
7. When green window pop its means 100% frp bypass tecno spark 3

1 . Techno spark 3 flash file here

2. Mtk drivers

3. SP Flash tool

please do that your own risk